Product Lines

DOT Anchoring Epoxy

DOT Anchoring Epoxy

QUIKRETE® DOT Anchoring Epoxy (No. 8620-36) is a two-component, 100% solids, high modulus, low-sag, structural epoxy adhesive with a working time of approximately 20 min at 75oF (24oC). Load can be applied at 2 hours (75oF [24oC]).

Use for:

  • Non-overhead vertical and horizontal applications
  • Rebar, dowel, and anchor installations into concrete and masonry substrates
  • Fastening in grout filled block and unreinforced masonry
  • Seismic anchoring and bracing
  • Grouting dowel bars and tie bars for full depth concrete repairs.
Available in:
  • 22 oz. (650 ml) cartridges (8620-36)
  • 53 oz. (1.56 L) cartridges (8620-37)


Data Sheet SDS Document - Part A SDS Document - Part B